Time Release Compound

Part No. 11044, 32 oz, each or 6/Case.

Part No. 11043, Gallon, each or 4/Case.

• Fast cut on dead paint, gelcoat and fiberglass.
• Removes 1200 grit or finer sand scratches.
• High gloss finishing on fresh or aged, single stage paint and clear coat.
• No wax, silicone or crystalline silica.
• Non-greasy, water-based for easy clean up without staining.
• Follow up with Finish Cut^™ #11040, using pad #11204, then protect with Shine Master^™ #11033.
• Marine use: Exterior defect removal on gelcoat or neglected fiberglass.

   

WIZARDS® TURBO CUT™ will quickly and easily remove 1200 grit and finer sand scratches from fresh, aged, single stage and clear coat finishes. TURBO CUT™ quickly restores dead paint, fiberglass and gelcoat, leveling to an impressive gloss

DIRECTIONS:

1. Starting with a clean, cool surface, apply TURBO CUT™ generously, slowly buff/spread in a 2'x2' area. Then increase to run rotary buffer at 1400-2200 RPM. For the best cut to remove scratches without hazing, use a WIZARDS® BLENDED WOOL PAD #11203 and avoid fast back and forth buffing.
2. Continue with FINISH CUT™ "No Swirls Compound" #11040 using the WIZARDS® WHITE FOAM CUTTING PAD #11310.
3. Finish by buffing with a WIZARDS® GRAY FINISHING PAD #11312 at 1000 RPM.
4. Detail finish to a super gloss with MIST-N-SHINE® #01214 and
   MULTI-FIBER CLOTH #11420