Smart Abrasive Technology Compound

Part No. 11048, 32 oz, 6/Case.

• Exclusive “Smart Abrasive Technology” incorporates latest Nano abrasives.
• Progressive cutting action with no gritty mess.
• Levels and removes sand scratches.
• Excellent all around compound for removing severe swirls, defects, fading and water spotting.
• No wax, silicone or crystalline silica.
• Water-based for easy clean-up.
• Use with the WIZARDS^® Buffing Pad System.
• Marine use: Exterior defect removal on gelcoat, paint, fiberglass, metallic flake. Use on average or neglected surfaces.

WIZARDS® MYSTIC CUT gives you fast cutting action and extreme gloss finishing by simply changing pads from Cut-Polish/ Finish. Use to remove coarse and fine sand-scratches, swirls, haze or oxidation on ALL paint/clear types, fresh or aged

DIRECTIONS:

1. Starting with a clean, cool surface, apply MYSTIC CUT" generously, slowly buff/spread in a 2'x2' area. Then increase to run rotary buffer at 1400-2200 RPM. For the best cut to remove scratches without hazing, use a WIZARDS® BLENDED WOOL PAD #11203.
2. Continue with a WIZARDS® WHITE FOAM CUTTING PAD #11310.
3. Finish by buffing with a WIZARDS® GRAY FINISHING PAD #11312 at 1000 RPM. For extremely soft paint continue with WIZARDS® BLUE ULTRA-FINISHING PAD #11314 using MYSTIC CUT" or MYSTIC POLISH™ #11047.
4. Detail finish to a super gloss with MIST-N-SHINE® #01214 and
   MULTI-FIBER CLOTH #11420

Smart Abrasive Technology^™ Machine Glaze

Part No. 11047, 32 oz, each or 6/Case.

• Exclusive “Nano-Sphere Technology” incorporates latest Nano abrasives.
• Use as a stand alone polish or the final step in the buffing process.
• Quickly removes swirls, light scratches, spider webbing and mild imperfections.
• No wax, silicone or crystalline silica.
• Safe for all paints.
• Apply by hand or machine.

* Follow with Shine Master^™ Polish & Breathable Sealant for long lasting protection.

WIZARDS® MYSTIC POLISH" MACHINE GLAZE removes swirl marks and micro light scratches from ALL dark color paint/clear types, fresh or aged; ideal follow-up to ALL cutting compounds. Superior results for general light buffing with rotary, orbital D/A polishers, or by hand: Ultra gloss finishing

DIRECTIONS:

1. Starting with a clean, cool surface, apply MYSTIC POLISH" generously using a WIZARDS® GRAY FINISHING PAD #11312, slowly buff/spread in a 2'x2' area, then increase to run rotary buffer at 1400-2200 RPM.
2. On black/dark colors or extremely soft paint, continue with WIZARDS® BLUE ULTRA-FINISHING PAD #11314.
3. Remove all residues with a Microfiber cloth and inspect.
4. Detail finish to a super gloss with MIST-N-SHINE® #01214 and

MULTI-FIBER CLOTH #11420.

ORBITAL D/A DIRECTIONS: Apply MYSTIC POLISH™ generously to full face of pad. Hold pad flat to surface and spread across a 2'x2' section using light to moderate pressure with 3-4 slow passes. Add drops as needed once pad is wet.

Clean face of pad with nyion pad conditioning brush #11231 as needed. HINT:

MYSTIC POLISH" also works for light compounding by switching to cutting pads.

Super Slick Nano Wax Technology

Part No. 11039, 8 oz, 12/Case.

• Exclusive formula incorporates synthetic Nano Wax polymers.
• Extreme gloss, slickness and protection benefits.
• Safe results on ALL paint/clear types, new or aged.
• Use as a stand alone wax, show glaze, or finishing/waxing step.
• Micro Polishes on soft paints.
• Use with "The Wizard 21^™" Big Throw Orbital Polisher or any dual action/orbital polisher or by hand application.
• Micro-fine polishing/2nd step to the WIZARDS "Scratch & Swirl Removal" System (SSR) using the Wizards 21 Big Throw Polisher.

WIZARDS MYSTIC NANO WAX" gives your paint an "Ultra Finish" with extreme gloss, slickness and protection benefits of synthetic Nano wax polymers. Safe results on ALL paint/clear types, new or aged. Use as a stand-alone wax, show glaze or finishing/waxing step using the WIZARDS 21 HD™ Big Throw Orbital Polisher. No dusting and non-abrasive to the softest and most sensitive paint/clears, especially black. "Best In Class" finishes can be achieved with MYSTIC NANO WAX™ in combination with the GRAY FOAM PAD when used with all Orbital D/A polishers

DIRECTIONS:

1. ORBITAL APPLICATION: Apply MYSTIC NANO WAX™ generously to full face of WIZARDS® GRAY FOAM PAD #11605. Hold pad flat to surface and spread across a 2'x2' section using light pressure with 3-4 slow passes. Add drops to proceed once pad is wet. Clean face of pad with nylon brush as needed.
2. HAND APPLICATION: Apply to a cool clean surface with foam applicator pad, spreading out thinly a section at a time. Remove residue with a quality WIZARDS® Microfiber Cloth immediately, before or after light hazing.
3. NOTE: For paint correction, use WIZARDS® MYSTIC CUT" #11048 to remove all scratches and swirls prior to applying MYSTIC NANO WAX".
   See WIZARDS® SCRATCH & SWIRL REMOVAL KIT #99121 (SSR) three pad/two product system.

Turbo Cut^™

Time Release^™ Compound

Part No. 11044, 32 oz, each or 6/Case.

• Fast cut on dead paint, gelcoat and fiberglass.
• Removes 1200 grit or finer sand scratches.
• High gloss finishing on fresh or aged, single stage paint and clear coat.
• No wax, silicone or crystalline silica.
• Non-greasy, water-based for easy clean up without staining.
• Follow up with Finish Cut^™ #11040, using pad #11204, then protect with Shine Master^™ #11033.
• Marine use: Exterior defect removal on gelcoat or neglected fiberglass.

Click Here For More Information and How To Use

No Swirls Compound

Part No. 11040, 32 oz, each or 6/Case.

• No swirls, easy clean up.
• Levels and removes scratches on paint and clear coat, fresh or aged finishes.
• One step buffing on most colors and clear coat, fresh or aged finishes.
• Brightens dull finishes and removes heavy paint overspray.
• Finish buffs to a high gloss.
• No wax, silicone or crystalline silica.
• Water-based, no staining, etching, or dusting.
• Marine use: Exterior defect removal on gelcoat, paint, fiberglass. Removes swirls and minor scratches on average surfaces

DIRECTIONS: Starting with a clean, cool surface, apply FINISH CUT" generously, slowly buff/spread in a 2'x2' area. Then increase to run rotary buffer at 1400-2200 RPM. For the best cut to remove scratches without hazing, use a WIZARDS® BLENDED WOOL PAD #11203 and avoid fast back and forth buffing. Continue with a WIZARDS® WHITE FOAM CUTTING PAD #11310. Finish by buffing with a WIZARDS® GRAY FINISHING PAD #11312 at 1000 RPM. Detail finish to a super gloss with MIST-N-SHINE® #01214 and MULTI-FIBER CLOTH #11420.