SiO2 Infused Polymer Coating

Part No. 51011, 22 oz, each or 12/Case.

• Easy - Spray on, Wipe off.
• Streak Free - Shade or Full Sun.
• Removes Light Dust and More.
• Super Gloss - Hydrophobic Beading.

WIZARDS* Ceramic Detailer quickly brings your finish to a high gloss while enhancing surface protection. Use to remove light dust and contaminants plus boost hydrophobic beading on all paints, ceramic coatings, waxes and sealants. Safe and effective on all paint/clears, glass, chrome, polished metals and vinyl wraps. Easy spray and wipe application provides a layer of polymer hybrid SiO2 infused spray coating that gives you a slick, deep finish with insane gloss and water beading.

DIRECTIONS: Shake lightly; spray directly onto surface and spread out evenly using a quality microfiber cloth, flip folded cloth and level coating to an even application. For best results paint should be smooth; claying or polishing may be required to remove stuck-on debris or scratches. Apply and level a section at a time. Wizards Ceramic Detailer can be applied in shade or full sun but always inspect for even application and use a high quality absorbent cloth. Any high spots noticed will easily wipe away to a uniform layer. Wizards Ceramic Detailer can be used right after washing (while still slightly wet) but note that this may dilute the formula and lessen performance.

Super Drying Towel

Part No. 36201, Size Approx. 20" x 28" (50cm x 70cm) 1100 GSM

• No Residue
  
•  Streak Free
  
• Scratch Free
• Quick Drying

After Vehicle Washing

80/20 Blend Polyester/Polyamide

CARE TIPS: For best results use liquid detergent
and wash with hot water. Do not use bleach or fabric
softener. Air dry or machine dry separately.

SiO2 Infused Shampoo

Part No. 53011, 16 oz, each or 12/Case.

• High Foaming Suds
• Removes Grime
• Safe on all Surfaces
• Cleans, Coats, Protects

FOAM CANNON OR BUCKET USE

WIZARDS® Ceramic Wash & Wax is a premium vehicle shampoo, giving you abundant foam to protect from wash induced scratches and leaving a coating to shine & protect most any vehicle finish. Recommended for ceramic and NON-ceramic coated finishes. Easy to use with a foam cannon, foam gun, or regular bucket wash system. Add instant hydrophobic Sio2 ceramic protection to any surface, including over any existing waxes, sealants or other protective coatings to improve high gloss shine and hydrophobic beading. Great for washing and shining Autos, Street Rods, Motorcycles, Boats, ATV, Trucks & More. Safe on all surfaces to attack and remove dust, soot, dirt and grime.

DIRECTIONS: Vehicle should be dry and cool. Prep foam cannon: Add 1 or 2 oz "Ceramic Wash & Wax" to foam canister, then stir or shake to mix. Connect your pressure washer and spray a slow uniform layer of foam with overlapping passes. Maintain about a 3-foot distance starting from the bottom of vehicle. Allow to dwell several minutes and fully rinse all foam and dirt away. If road film remains, re-foam and gently wipe with microfiber mitt or use standard bucket washing method. Then dry with a WIZARDS Drying Towel #36201. BUCKET WASH:

Pre rinse vehicle to remove dirt and debris, add 2 oz of "Ceramic Wash & Wax" to 3 or 4 gallons of water, wash and rinse clean, then dry with drying towel.

Snow Foaming Action

Part No. 52011, 16 oz, each or 12/Case.

• Ultra Cling Suds
  
• Lubricating Foam
  
• Scratch & Streak Free
• Removes Dirt & Grime
  
• pH Safe on All Surfaces

WIZARDS® Max Foam Wash produces huge amounts of pillow foam; these lubricating suds cling to soften and protect your paint from wash induced scratching before high pressure rinsing. Best snow foam is produced with a quality foam cannon but excellent results are also achieved with a foam gun or bucket use. Gentle, thorough cleaning removes dirt and grime while preserving your wax, sealant or ceramic coating. Streak free rinsing assures quick drying and maximum shine. Great for washing Autos, Street Rods, Motorcycles, Boats, ATVs, Dirt Bikes, Off Road Trucks & More. Safe on all surfaces to attack and remove dust, soot, dirt and mud.

DIRECTIONS: Vehicle should be dry and cool. Prep foam cannon: Mix 2 oz "Max Foam Wash" to 28 oz water (1:14 ratio) then stir or shake to mix. Connect your pressure washer and spray a slow uniform thick layer of foam with overlapping passes.

Maintain about a 3-foot distance starting from the bottom of vehicle. Allow to dwell several minutes, then fully rinse all foam and dirt away. If road film remains, re-foam and gently wipe with microfiber mitt or use standard bucket washing method. Then dry with a WIZARDS* Drying Towel #36201.

For off road vehicles pressure wash off heavy mud before using Max Foam Wash.